Bowflex SelectTech 1090 Adjustable Dumbbell (Single)

Do away with your space-consuming workout equipment and consolidate to an innovative Bowflex SelectTech 1090 adjustable dumbbell. Offering adjustable resistance from 10 pounds all the way up to 90 pounds (in 5-pound increments),

The SelectTech 1090 does the work of multiple dumbbells in one with its innovative adjustable dial.

the SelectTech 1090 does the work of multiple dumbbells in one, so you don't need to dedicate more than a few feet of space to your workout area. The 1090 dumbbell is outfitted with a single handle connected to a dial mechanism. As you turn the dial upward, the handle latches on to additional weight plates, with an easy-to-read display telling you how much weight you've chosen. At lighter weights, you can perform basic toning and strength exercises, such as curls and raises, while at heavier weights, you can do more demanding lifts like shrugs and lunges. Best of all, you won't have to buy new dumbbells as you get stronger, as the SelectTech 1090s provide all the weight you need.

Key Details:

Weight Range: 10 to 90 lbs (4.5 to 40.8 kg)
Exercises: 30+
Weight Settings: 17
Weight Settings (in pounds): 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, and 90
Dimensions: 17.5 inches long by 10 inches wide by 10 inches tall (44.4 x 24.2 x 5.3 cm)

Manufaturer's Warranty
Two-year limited warranty on all parts, five-year warranty on weight plates, one-year warranty on labor

Owner Reviews, Ratings, Comments and Criticism
First off, this is a great product, but I will not spend the time reviewing the great things about this product because I feel there are many other reviews that have already done that. Here are some things I found I thought should be helpful to others: 1) In the "most helpful critical review" it is listed that the rectangular chrome handles are a pain to deal with. This almost compelled me not to buy this product. However, after trying out the DBs, I did not find it much of a bother. The "rectangular" handles are pretty much round with a hint of "rectangulariness" if you will. Not much of a bother to me, but some thick tape cloth should remedy the problem if you have sensitive hands. 2) To those that do not want to buy the $150 stand, I found that instead of picking the DBs off the floor, you can simply make use of the shipping boxes as a custom made stand. Just turn over the Styrofoam and cut off the top lid of the box and place the DB within the box and you are set. The DBs are still a little low, but it is better than picking them off the floor. 3) If you ever have the problem of a DB not fitting within the base evenly, the dials are stuck, and one of the plates does not attach to the DB, do not send in the DB to the manufacturer just yet (I had this occur to me today). After some experimenting, I finally figured out that all I had to do was remove the DB from the base and remove the plates from the base until the base was completely emptied. Then, with the emptied base, place the DB back within the base (without remaining plates on the floor). You should be able to switch the dials back to 10 lbs with plates from the DB coming off. Then simply place back all the plates within the base and place the DB back within the base with the plates ready to go. The DB should pick the plates right back up. This experiment saved me a lot of money because I forgot to send in the warranty mail within 30 days (it's on the back of the paperback instructions). Hope you found at least one of these points helpful!